Quantcast
Channel: Ubuntu Forums
Viewing all 82528 articles
Browse latest View live
↧

[ubuntu] 3 different pcs, 3 different kernel versions

March 24, 2019, 8:26 am
$
0
0
Hi

I have 3 pcs with ubuntu 16.04, they all have different versions of the kernel. ie 4.4.0-75-generic, 4.4.0-134-generic, 4.4.0-143-generic. They all have the software updater active and updating the machines. Why don;t they all have the latest ( 4.4.0-143-generic ) kernel?

Is there a way to force the latest kernel to update?

If I install the latest kernel from synaptic, am I going to brake the pc?
↧
Search

[ubuntu] Files - Other Locations

March 24, 2019, 8:30 am
$
0
0
Folks,

Running Ubuntu 18:04 LTS

Have an issue when I access 'other locations' on my local network. I have an sftp://192.168.1.12/ locations which logs me in to the root location via my ssh credentials. This is fine as this device is used as a media server which I access via the /media directory.

So far so good.

If using the files v3.26.4 manager I then switch to any local folders when I return to my network share in puts me in the 'home' folder and not the 'root'. Can see no way of opening parent folder, no obvious way of entering a filepath.

The only way I can appear to get back is either pressing back button continuously r re-establishing my sftp connection.

Previous version of Ubuntu I could open a location text window which would allow me to enter / but if there is one here I haven't found it.

If anyone has a suggestion appreciate advice.

Geffers
↧
↧

[lubuntu] Lost restoring grub using boot-repair

March 24, 2019, 8:51 am
$
0
0
I have a computer on which a Lubuntu installation was working. Now I get "Reboot and select proper boot device" when I try to boot. I assume that the boot partition got corrupted, so I am trying to use boot-repair to fix the problem. When I click "Recommended repair" I get "Please use this software in a live session". I am using the software in a live session of Knoppix running on a flash drive. I also tried "Separate /boot/efi partition" under "GRUB location" in "Advanced options" because fstab says that is how it was mounted, but I get the same demand about using the software in a live session.

boot-info is here:

http://paste.ubuntu.com/p/sbqP5XcpjH/

I have pretty much no idea what I am doing, so any suggestions would be greatly appreciated.
↧

MATE slow to load panel...

March 24, 2019, 9:16 am
$
0
0
So I have Ubuntu 18.04 LTS and I installed the most recent version of mate 1.22 via this guide:

http://tipsonubuntu.com/2019/03/22/i...4/#prettyPhoto

I have everything setup the way I want it, except that on a startup the panel lags way behind. When I first installed mate it all loaded blisteringly fast. Now the desktop loads fast as usual, but the panel takes longer (5-10 seconds). Any ideas what is causing this lag? I though maybe it was the icon pack I was using so I tried several and the issue remains. Any help is appreciated. Thank you in advance!
↧

Occasionally cors error out of the blue for x seconds

March 24, 2019, 12:09 pm
$
0
0
I am building my API with Laravel's Lumen (newest version). My front-end is build with VueJS.

Everything is working perfectly fine, but every now and then out of the blue I receive CORS errors. After x-amount of minutes (or seconds) it will be gone again like nothing ever happened.

I have been searching for error logs and other stuff for days but without results. Could anyone please tell me how I can find out what is wrong?

I am totally clueless at the moment.

Ubuntu 18.04 with Apache2. Lumen (newest) with VueJS (newest).

The error that I am receiving is:

Cross-Origin-aanvraag geblokkeerd: de Same Origin Policy staat het lezen van de externe bron op https://example.com/v1/verify-token niet toe. (Reden: CORS-aanvraag is niet gelukt).

Translated to English:

Cross-Origin-Request blocked. The Same Origin Policy does not allow reading from the external source at {website}. Reason: CORS-request failed.

As said, sometimes I can work for half an hour or so before this error occurs. After a couple of refreshes the error is gone and everything works as intended.

I checked my PHP7.2-FPM log, Apache2 log, Laravel (Lumen) logs but nothing is mentioned anywhere.

I also checked RAM and CPU, compared to when I have this error and when not. No difference. Same for network information with (sudo ifconfig). Both the same no difference.

Does anyone have a clue where to look?
↧
↧

[ubuntu] Issue with 16.04 package files + /etc/apt/sources.list seems to have disappeared?!

March 24, 2019, 12:09 pm
$
0
0
Hello,

Over the past few months, I've been getting the red warning icon on my indicator bar telling me that something is wrong with the packages, but after I do sudo rm /etc/apt/sources.list and the usual update stuff, it tends to return to normal. However, I do all this stuff around my pretty busy work schedule so am mainly just trying to keep things superficially tidy and keeping the warning messages at bay without ever getting to the root, so to speak.

However, recently it's gotten pretty bad so I thought I'd attempt an upgrade to 18.04. Couldn't do that because I was told that there was a package that required an update (iirc) and it remained so after sudo apt-get update etc. Weird. Anyway, I learnt that it was lutris and I just removed it because I really wanted to get this sorted. So some morning last week I got it all started prepping for 18.04.

Then at about 7pm the same day I was about to pack it up when I noticed behind the dozens of tabs and programs I had started the 18.04 upgrade. I didn't have time to go through with it, so to the "Do you want to proceed with the upgrade?" prompt, I chose N.

I thought that would all be OK, but now it seems something is majorly afoot with my packages.

Specifically, the /etc/apt/sources.list seemed to have disappeared when I tried to do sudo rm /etc/apt/sources.list, as I got the message saying that that directory did not exist. I have since pasted in a proper 16.04 packages list, though I wasn't sure if this was really a good idea. It seems to have worked, since I get no error message here though.

I went back to do sudo apt-get update and all appeared to be fine except the end of the process returned a series of warnings followed by this:

E: Unable to parse package file /var/lib/apt/lists/ppa.launchpad.net_knapsu_openxcom_ubuntu_dists_xen ial_main_binary-amd64_Packages (1)
E: Unable to parse package file /var/lib/apt/lists/ppa.launchpad.net_knapsu_openxcom_ubuntu_dists_xen ial_main_binary-i386_Packages (1)
E: Unable to parse package file /var/lib/apt/lists/ppa.launchpad.net_knapsu_openxcom_ubuntu_dists_xen ial_main_binary-all_Packages (1)
E: Unable to parse package file /var/lib/apt/lists/ppa.launchpad.net_knapsu_openxcom_ubuntu_dists_xen ial_main_i18n_Translation-en%5fGB (1)
E: Unable to parse package file /var/lib/apt/lists/ppa.launchpad.net_knapsu_openxcom_ubuntu_dists_xen ial_main_i18n_Translation-en (1)
W: You may want to run apt-get update to correct these problems
E: The package cache file is corrupted

Out of interest/desperation I also thought I'd try sudo do-release-upgrade but was informed that I should Please install all available updates for your release before upgrading.

When I tried to check the update settings using the GUI, I saw that all Ubuntu Options had been unchecked, and there were numerous seeming duplicated in my Other Software list. I, probably foolishly, checked all the Ubuntu Options boxes and then tried to apply the changes, when I got the message:

Failed to load the package list

This is a serious problem. Try again later. If this problem appears again, please report an error to the developers.

With the details:

W:Target Sources (main/source/Sources) is configured multiple times in /etc/apt/sources.list.d/arx-ubuntu-release-xenial.list:2 and /etc/apt/sources.list.d/arx-ubuntu-release-xenial.list:3, W:Target Sources (main/source/Sources) is configured multiple times in /etc/apt/sources.list.d/arx-ubuntu-release-xenial.list:2 and /etc/apt/sources.list.d/arx-ubuntu-release-xenial.list:4, W:Target Sources (main/source/Sources) is configured multiple times in /etc/apt/sources.list.d/arx-ubuntu-release-xenial.list:2 and /etc/apt/sources.list.d/arx-ubuntu-release-xenial.list:5, E:Unable to parse package file /var/lib/apt/lists/ppa.launchpad.net_knapsu_openxcom_ubuntu_dists_xen ial_main_binary-amd64_Packages (1), E:Unable to parse package file /var/lib/apt/lists/ppa.launchpad.net_knapsu_openxcom_ubuntu_dists_xen ial_main_binary-i386_Packages (1), E:Unable to parse package file /var/lib/apt/lists/ppa.launchpad.net_knapsu_openxcom_ubuntu_dists_xen ial_main_binary-all_Packages (1), E:Unable to parse package file /var/lib/apt/lists/ppa.launchpad.net_knapsu_openxcom_ubuntu_dists_xen ial_main_i18n_Translation-en (1), E:Unable to parse package file /var/lib/apt/lists/ppa.launchpad.net_knapsu_openxcom_ubuntu_dists_xen ial_main_i18n_Translation-en%%5fGB (1), W:You may want to run apt-get update to correct these problems, E:The package cache file is corrupted

It seems kinda self-explanatory, but I've tried to fix this intuitively for a while now and don't seem to be getting anywhere with it, so am hoping that you might be able to help.

I'm not sure if it's relevant, but also when I tried to use (gksudo) nautilus via the terminal I was allowed, but got this message too:

(nautilus:22598): GLib-GIO-CRITICAL **: g_dbus_interface_skeleton_unexport: assertion 'interface_->priv->connections != NULL' failed



When I tried (vanilla) nautilus again I got this:

(nautilus:22188): GLib-GIO-CRITICAL **: g_dbus_interface_skeleton_unexport: assertion 'interface_->priv->connections != NULL' failed

(nautilus:22188): GLib-GIO-CRITICAL **: g_dbus_interface_skeleton_unexport: assertion 'interface_->priv->connections != NULL' failed

(nautilus:22188): Gtk-CRITICAL **: gtk_icon_theme_get_for_screen: assertion 'GDK_IS_SCREEN (screen)' failed

(nautilus:22188): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(nautilus:22188): GLib-GObject-CRITICAL **: g_signal_connect_object: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed



What's the simplest way to remedy this mess? Is there any way I can do so without having to reinstall Ubuntu?

Thanks!
↧

Should I move my installation to another partition?

March 24, 2019, 12:17 pm
$
0
0
Hi,

Given my recent concerns about speed of ubuntu I wondered if it being at the last part of the partition table has anything to do with it? Being slower than I expected?

I did actually try to move it to the front however I couldn't use the cp - a command because it said I couldn't write to the destination partition And I don't see why not because I had just made it while using the ubuntu live disc.
↧

Getting Fastai.structured to import

March 24, 2019, 12:51 pm
$
0
0
In the following paper there is a some code that employs fastai. I will show the link now:

https://www.analyticsvidhya.com/blog...niques-python/

In it there are some lines that use fastai. The section of python code shows this:

Code:
#create features
from fastai.structured import  add_datepart
add_datepart(new_data, 'Date')
new_data.drop('Elapsed', axis=1, inplace=True)  #elapsed will be the time stamp

Now the line


from fastai.structured import add_datapart


fails. The code would have worked in January of 2019. The part fastai.structured part has since been moved.

The fastai forum said to try this line in place of above line:


from fastai.tabular import add_datepart


that failed also. I can provide the output when each syntax (fastai.structured and fastai.tabular) is used.

It is just more code, trust me both fail.

I cannot find the answer. Things have changed since January 2019, but I am not sure how.

Anyway, what code will fix this error.

Any help appreciated.

Respectfully,

LR
↧
Search

Host freeze if there isn't enough RAM available

March 24, 2019, 12:51 pm
$
0
0
Hello,
Every time I start a VM, I have to make sure that the amount of free RAM is at least equal to the VM allocated RAM. If it doesn't, the host system freezes and I have to do a hard reset. So, I usually have to close some windows before launching the VM, in order to free up some RAM. Sometimes, I forget to do that and the system freezes. That's annoying.
Is there anything I can do to solve that?

Host:
Ubuntu 18.04
8 GB RAM
SSD

Guest:
Windows 7
2 GB RAM
↧
↧

Cannot Install RTMPDUMP

March 24, 2019, 12:57 pm
$
0
0
I am running Ubuntu 18.04 and I am trying to install rtmpdump in order to stream video to a server using FFmpeg. When making rtmpdump it fails, I was wondering if anyone has any idea why
Code:
git clone git://git.ffmpeg.org/rtmpdump
Cloning into 'rtmpdump'...
remote: Counting objects: 2604, done.
remote: Compressing objects: 100% (965/965), done.
remote: Total 2604 (delta 1962), reused 2148 (delta 1638)
Receiving objects: 100% (2604/2604), 806.24 KiB | 571.00 KiB/s, done.
Resolving deltas: 100% (1962/1962), done.
lukepenrose1@ubuntu:~$ cd rtmpdump
lukepenrose1@ubuntu:~/rtmpdump$ cd libtmp
bash: cd: libtmp: No such file or directory
lukepenrose1@ubuntu:~/rtmpdump$ cd librtmp
lukepenrose1@ubuntu:~/rtmpdump/librtmp$ make clean
rm -f *.o *.a *.so *.so.1 librtmp.pc
lukepenrose1@ubuntu:~/rtmpdump/librtmp$ sudo make install
gcc -Wall  -DRTMPDUMP_VERSION=\"v2.4\" -DUSE_OPENSSL  -O2 -fPIC  -c -o rtmp.o rtmp.c
In file included from handshake.h:86:0,
                from rtmp.c:152:
dh.h: In function ‘DHInit’:
dh.h:256:12: error: dereferencing pointer to incomplete type ‘DH {aka struct dh_st}’
  MP_new(dh->g);
            ^
dh.h:171:19: note: in definition of macro ‘MP_new’
 #define MP_new(m) m = BN_new()
                  ^
In file included from rtmp.c:152:0:
handshake.h: In function ‘InitRC4Encryption’:
handshake.h:120:12: error: storage size of ‘ctx’ isn’t known
  HMAC_CTX ctx;
            ^~~
In file included from rtmp.c:152:0:
handshake.h:72:35: warning: implicit declaration of function ‘HMAC_CTX_init’; did you mean ‘HMAC_CTX_new’? [-Wimplicit-function-declaration]
 #define HMAC_setup(ctx, key, len) HMAC_CTX_init(&ctx); HMAC_Init_ex(&ctx, key, len, EVP_sha256(), 0)
                                  ^
handshake.h:125:3: note: in expansion of macro ‘HMAC_setup’
  HMAC_setup(ctx, secretKey, 128);
  ^~~~~~~~~~
handshake.h:74:67: warning: implicit declaration of function ‘HMAC_CTX_cleanup’; did you mean ‘HMAC_CTX_get_md’? [-Wimplicit-function-declaration]
 #define HMAC_finish(ctx, dig, dlen) HMAC_Final(&ctx, dig, &dlen); HMAC_CTX_cleanup(&ctx)
                                                                  ^
handshake.h:127:3: note: in expansion of macro ‘HMAC_finish’
  HMAC_finish(ctx, digest, digestLen);
  ^~~~~~~~~~~
In file included from rtmp.c:152:0:
handshake.h:120:12: warning: unused variable ‘ctx’ [-Wunused-variable]
  HMAC_CTX ctx;
            ^~~
handshake.h: In function ‘HMACsha256’:
handshake.h:269:12: error: storage size of ‘ctx’ isn’t known
  HMAC_CTX ctx;
            ^~~
handshake.h:269:12: warning: unused variable ‘ctx’ [-Wunused-variable]
rtmp.c: In function ‘RTMP_ReadPacket’:
rtmp.c:3555:7: warning: variable ‘didAlloc’ set but not used [-Wunused-but-set-variable]
  int didAlloc = FALSE;
      ^~~~~~~~
At top level:
rtmp.c:2907:19: warning: ‘av_NetConnection_Connect_Rejected’ defined but not used [-Wunused-const-variable=]
 static const AVal av_NetConnection_Connect_Rejected =
                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
rtmp.c:1559:35: warning: ‘av_record’ defined but not used [-Wunused-const-variable=]
 #define SAVC(x) static const AVal av_##x = AVC(#x)
                                  ^
rtmp.c:1905:1: note: in expansion of macro ‘SAVC’
 SAVC(record);
 ^~~~
<builtin>: recipe for target 'rtmp.o' failed
make: *** [rtmp.o] Error 1
↧

update error target packages is configured multiple times

March 24, 2019, 1:04 pm
$
0
0
HI guys,

i have a small problem and maybe you would be so kind and help me.

when i do an update on my ubuntu 18.04 server i get an error

--------------------------

W: Target Packages (universe/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:19
W: Target Packages (universe/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:19
W: Target Packages (universe/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:19
W: Target Translations (universe/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:19
W: Target CNF (universe/cnf/Commands-amd64) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:19
W: Target CNF (universe/cnf/Commands-all) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:19
W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:29
W: Target Packages (multiverse/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:29
W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:29
W: Target Translations (multiverse/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:29
W: Target CNF (multiverse/cnf/Commands-amd64) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:29
W: Target CNF (multiverse/cnf/Commands-all) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:29
W: Target Packages (universe/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:21
W: Target Packages (universe/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:21
W: Target Packages (universe/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:21
W: Target Translations (universe/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:21
W: Target CNF (universe/cnf/Commands-amd64) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:21
W: Target CNF (universe/cnf/Commands-all) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:21
W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:31
W: Target Packages (multiverse/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:31
W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:31
W: Target Translations (multiverse/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:31
W: Target CNF (multiverse/cnf/Commands-amd64) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:31
W: Target CNF (multiverse/cnf/Commands-all) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:31
W: Target Packages (universe/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:51
W: Target Packages (universe/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:51
W: Target Packages (universe/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:51
W: Target Translations (universe/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:51
W: Target CNF (universe/cnf/Commands-amd64) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:51
W: Target CNF (universe/cnf/Commands-all) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:51
W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:53
W: Target Packages (multiverse/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:53
W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:53
W: Target Translations (multiverse/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:53
W: Target CNF (multiverse/cnf/Commands-amd64) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:53
W: Target CNF (multiverse/cnf/Commands-all) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:53
W: Target Packages (universe/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:19
W: Target Packages (universe/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:19
W: Target Packages (universe/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:19
W: Target Translations (universe/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:19
W: Target CNF (universe/cnf/Commands-amd64) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:19
W: Target CNF (universe/cnf/Commands-all) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:19
W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:29
W: Target Packages (multiverse/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:29
W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:29
W: Target Translations (multiverse/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:29
W: Target CNF (multiverse/cnf/Commands-amd64) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:29
W: Target CNF (multiverse/cnf/Commands-all) is configured multiple times in /etc/apt/sources.list:8 and /etc/apt/sources.list:29
W: Target Packages (universe/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:21
W: Target Packages (universe/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:21
W: Target Packages (universe/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:21
W: Target Translations (universe/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:21
W: Target CNF (universe/cnf/Commands-amd64) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:21
W: Target CNF (universe/cnf/Commands-all) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:21
W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:31
W: Target Packages (multiverse/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:31
W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:31
W: Target Translations (multiverse/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:31
W: Target CNF (multiverse/cnf/Commands-amd64) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:31
W: Target CNF (multiverse/cnf/Commands-all) is configured multiple times in /etc/apt/sources.list:13 and /etc/apt/sources.list:31
W: Target Packages (universe/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:51
W: Target Packages (universe/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:51
W: Target Packages (universe/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:51
W: Target Translations (universe/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:51
W: Target CNF (universe/cnf/Commands-amd64) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:51
W: Target CNF (universe/cnf/Commands-all) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:51
W: Target Packages (multiverse/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:53
W: Target Packages (multiverse/binary-i386/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:53
W: Target Packages (multiverse/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:53
W: Target Translations (multiverse/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:53
W: Target CNF (multiverse/cnf/Commands-amd64) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:53
W: Target CNF (multiverse/cnf/Commands-all) is configured multiple times in /etc/apt/sources.list:49 and /etc/apt/sources.list:53

---------------------


this is my sources.list

--------------------
# deb http://asi-fs-n.contabo.net/ubuntu bionic main restricted universe multiverse restricted


# deb http://asi-fs-n.contabo.net/ubuntu bionic-updates main restricted universe multiverse restricted
# deb http://security.ubuntu.com/ubuntu bionic-security main restricted universe multiverse restricted


# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://asi-fs-n.contabo.net/ubuntu bionic main restricted universe multiverse restricted
# deb-src http://asi-fs-n.contabo.net/ubuntu bionic main restricted universe multiverse restricted


## Major bug fix updates produced after the final release of the
## distribution.
deb http://asi-fs-n.contabo.net/ubuntu bionic-updates main restricted universe multiverse restricted
# deb-src http://asi-fs-n.contabo.net/ubuntu bionic-updates main restricted universe multiverse restricted


## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://asi-fs-n.contabo.net/ubuntu bionic universe
# deb-src http://asi-fs-n.contabo.net/ubuntu bionic universe
deb http://asi-fs-n.contabo.net/ubuntu bionic-updates universe
# deb-src http://asi-fs-n.contabo.net/ubuntu bionic-updates universe


## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://asi-fs-n.contabo.net/ubuntu bionic multiverse
# deb-src http://asi-fs-n.contabo.net/ubuntu bionic multiverse
deb http://asi-fs-n.contabo.net/ubuntu bionic-updates multiverse
# deb-src http://asi-fs-n.contabo.net/ubuntu bionic-updates multiverse


## N.B. software from this repository may not have been tested as
## extensively as that contained in the main restricted universe multiverse release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb http://asi-fs-n.contabo.net/ubuntu bionic-backports main restricted universe multiverse restricted universe multiverse
# deb-src http://asi-fs-n.contabo.net/ubuntu bionic-backports main restricted universe multiverse restricted universe multiverse


## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
# deb http://archive.canonical.com/ubuntu bionic partner
# deb-src http://archive.canonical.com/ubuntu bionic partner


deb http://security.ubuntu.com/ubuntu bionic-security main restricted universe multiverse restricted
# deb-src http://security.ubuntu.com/ubuntu bionic-security main restricted universe multiverse restricted
deb http://security.ubuntu.com/ubuntu bionic-security universe
# deb-src http://security.ubuntu.com/ubuntu bionic-security universe
deb http://security.ubuntu.com/ubuntu bionic-security multiverse
# deb-src http://security.ubuntu.com/ubuntu bionic-security multiverse
deb http://archive.ubuntu.com/ubuntu bionic universe
deb http://archive.ubuntu.com/ubuntu bionic-backports main restricted universe multiverse




can anybody give me an idea how to fix this problem?

thanks in advance for your kind help

Tom
↧

[ubuntu] AnyConnect package on the secure gateway could not be located

March 24, 2019, 1:07 pm
$
0
0
Hi, using Ubuntu 16.04.6 LTS (4.4.0-67-generic, x86_64) I try to connect to a server with Cisco AnyConnect Secure Mobility Client version 4.6.02074 and I get the error:

Code:
The AnyConnect package on the secure gateway could not be located. You may be experiencing network connectivity issues. Please try connecting again.
What's the problem? How should I solve it?
↧

[ubuntu] I'm getting SQUASHFS and print_req errors when restarting after installation

March 24, 2019, 1:14 pm
$
0
0
I'm trying to install Ubuntu 16.04 on my computer (dualboot with Win10), but when I see "installation is complete, restart your device" message, I click on restart and I get SQUASHFS and print_req errors and ubuntu won't start up.

What I did when trying to install Ubuntu;
-Burned ISO file to 2 different USBs, incase if problem was causing by one of them (got same result)
-Closed Fast boot and secure boot
-Opened CSM thingy
-Booted from non-UEFI usb boot option
-Couldn't close USB legacy mode because my computer resisted booting from USB when it's closed
-Deselected every other boot option but non-UEFI USB option from BIOS menu
-Ubuntu won't showup in BIOS Boot options menu, but when I try to install it again, installer says "Ubuntu 16.04 detected on your computer" and suggests me to install Ubuntu 16.04 alongside with ubuntu 16.04

Errors;
SQUASHFS error: unable to read
->fragment cache entry
-> page, block *some hexadecimal numbers*
print_req_error: I/O error, devloop0, sector *some decimal numbers*

I need to install ubuntu 16.04 so there is no point to try any other version but any suggestion is appreciated.
↧
↧

Can't connect to one wifi network

March 24, 2019, 2:17 pm
$
0
0
I was using wifi network before and then wasn't home for week and it stopped detecting it when I came back. Connecting through hidden networks fails. It works on windows and android. It has the same settings.
Connecting to another wifi works.
Did any recent update change something?
Using 18.04 Lenovo G580.
↧

Need to get GRUB working.

March 24, 2019, 2:49 pm
$
0
0
New computer with an SSD holding Win10. Second HD used for storage. Both drives installed when purchased. I removed my SSD from old machine and installed it in new machine. How can I get GRUB working again.
↧
Search

No wlan0 interface

March 24, 2019, 2:56 pm
$
0
0
Hello everyone. At my lenovo t410 i can`t see wifi network and can`t see wlan0 interface.

I rad instruction and here my all info http://paste.ubuntu.com/p/Dr5db2YsWf/ for analyses. I`ll be glad for any info and instructions.

Code:
########## wireless info START ##########

Report from: 24 Mar 2019 23:45 EET +0200

Booted last: 24 Mar 2019 00:00 EET +0200

Script from: 22 Oct 2018 03:34 UTC +0000

##### release ###########################

Distributor ID:    Ubuntu
Description:    Ubuntu 18.04.2 LTS
Release:    18.04
Codename:    bionic

##### kernel ############################

Linux 4.15.0-47-generic #50-Ubuntu SMP Wed Mar 13 10:44:52 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux

Parameters: ro, quiet, splash, vt.handoff=1

##### desktop ###########################

Unity

##### lspci #############################

00:19.0 Ethernet controller [0200]: Intel Corporation 82577LM Gigabit Network Connection [8086:10ea] (rev 06)
    Subsystem: Lenovo 82577LM Gigabit Network Connection [17aa:2153]
    Kernel driver in use: e1000e

##### lsusb #############################

Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 17ef:480f Lenovo Integrated Webcam [R5U877]
Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

##### PCMCIA card info ##################

##### rfkill ############################

0: tpacpi_bluetooth_sw: Bluetooth
    Soft blocked: yes
    Hard blocked: no

##### secure boot #######################

'mokutil' is not installed (package "mokutil").

##### lsmod #############################

wmi_bmof              16384  0
mxm_wmi                16384  0
wmi                    24576  2 wmi_bmof,mxm_wmi

##### interfaces ########################

[/etc/network/interfaces]
auto lo
iface lo inet loopback

##### ifconfig ##########################

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback <MAC address> brd <MAC address>
    inet 127.0.0.1/8 scope host lo
      valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
      valid_lft forever preferred_lft forever
2: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether <MAC 'enp0s25' [IF1]> brd <MAC address>
    inet 192.168.0.101/24 brd 192.168.0.255 scope global dynamic noprefixroute enp0s25
      valid_lft 6159sec preferred_lft 6159sec
    inet6 fe80::59cb:6327:52ba:b891/64 scope link noprefixroute
      valid_lft forever preferred_lft forever

##### iwconfig ##########################

enp0s25  no wireless extensions.

lo        no wireless extensions.

##### route #############################

default via 192.168.0.1 dev enp0s25 proto dhcp metric 100
169.254.0.0/16 dev enp0s25 scope link metric 1000
192.168.0.0/24 dev enp0s25 proto kernel scope link src 192.168.0.101 metric 100

##### resolv.conf #######################

[777 root '/etc/resolv.conf' -> '../run/resolvconf/resolv.conf']

nameserver 127.0.0.53

##### network managers ##################

Installed:

    NetworkManager

Running:

root      759    1  0 23:28 ?        00:00:00 /usr/sbin/NetworkManager --no-daemon

##### NetworkManager info ###############

GENERAL.DEVICE:                        enp0s25
GENERAL.TYPE:                          ethernet
GENERAL.NM-TYPE:                        NMDeviceEthernet
GENERAL.VENDOR:                        Intel Corporation
GENERAL.PRODUCT:                        82577LM Gigabit Network Connection
GENERAL.DRIVER:                        e1000e
GENERAL.DRIVER-VERSION:                3.4.2.1-NAPI
GENERAL.FIRMWARE-VERSION:              0.12-1
GENERAL.HWADDR:                        <MAC 'enp0s25' [IF1]>
GENERAL.MTU:                            1500
GENERAL.STATE:                          100 (connected)
GENERAL.REASON:                        0 (No reason given)
GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:19.0/net/enp0s25
GENERAL.IP-IFACE:                      enp0s25
GENERAL.IS-SOFTWARE:                    no
GENERAL.NM-MANAGED:                    yes
GENERAL.AUTOCONNECT:                    yes
GENERAL.FIRMWARE-MISSING:              no
GENERAL.NM-PLUGIN-MISSING:              no
GENERAL.PHYS-PORT-ID:                  --
GENERAL.CONNECTION:                    Wired connection 1
GENERAL.CON-UUID:                      60ede433-1d4b-329e-9af2-b3ffd4db8f27
GENERAL.CON-PATH:                      /org/freedesktop/NetworkManager/ActiveConnection/1
GENERAL.METERED:                        no (guessed)
CAPABILITIES.CARRIER-DETECT:            yes
CAPABILITIES.SPEED:                    100 Mb/s
CAPABILITIES.IS-SOFTWARE:              no
CAPABILITIES.SRIOV:                    no
WIRED-PROPERTIES.CARRIER:              on
IP4.ADDRESS[1]:                        192.168.0.101/24
IP4.GATEWAY:                            192.168.0.1
IP4.ROUTE[1]:                          dst = 0.0.0.0/0, nh = 192.168.0.1, mt = 100
IP4.ROUTE[2]:                          dst = 192.168.0.0/24, nh = 0.0.0.0, mt = 100
IP4.ROUTE[3]:                          dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
IP4.DNS[1]:                            192.168.0.1
DHCP4.OPTION[1]:                        requested_host_name = 1
DHCP4.OPTION[2]:                        domain_name_servers = 192.168.0.1
DHCP4.OPTION[3]:                        requested_domain_search = 1
DHCP4.OPTION[4]:                        requested_time_offset = 1
DHCP4.OPTION[5]:                        requested_domain_name = 1
DHCP4.OPTION[6]:                        requested_rfc3442_classless_static_routes = 1
DHCP4.OPTION[7]:                        requested_broadcast_address = 1
DHCP4.OPTION[8]:                        expiry = 1553470112
DHCP4.OPTION[9]:                        requested_wpad = 1
DHCP4.OPTION[10]:                      next_server = 0.0.0.0
DHCP4.OPTION[11]:                      broadcast_address = 192.168.0.255
DHCP4.OPTION[12]:                      requested_interface_mtu = 1
DHCP4.OPTION[13]:                      requested_subnet_mask = 1
DHCP4.OPTION[14]:                      dhcp_lease_time = 7200
DHCP4.OPTION[15]:                      dhcp_message_type = 5
DHCP4.OPTION[16]:                      ip_address = 192.168.0.101
DHCP4.OPTION[17]:                      subnet_mask = 255.255.255.0
DHCP4.OPTION[18]:                      requested_static_routes = 1
DHCP4.OPTION[19]:                      routers = 192.168.0.1
DHCP4.OPTION[20]:                      requested_netbios_scope = 1
DHCP4.OPTION[21]:                      requested_ntp_servers = 1
DHCP4.OPTION[22]:                      requested_netbios_name_servers = 1
DHCP4.OPTION[23]:                      requested_ms_classless_static_routes = 1
DHCP4.OPTION[24]:                      requested_routers = 1
DHCP4.OPTION[25]:                      requested_domain_name_servers = 1
DHCP4.OPTION[26]:                      network_number = 192.168.0.0
DHCP4.OPTION[27]:                      dhcp_server_identifier = 192.168.0.1
IP6.ADDRESS[1]:                        fe80::59cb:6327:52ba:b891/64
IP6.GATEWAY:                            --
IP6.ROUTE[1]:                          dst = ff00::/8, nh = ::, mt = 256, table=255
IP6.ROUTE[2]:                          dst = fe80::/64, nh = ::, mt = 256
IP6.ROUTE[3]:                          dst = fe80::/64, nh = ::, mt = 100
CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{1}
CONNECTIONS.AVAILABLE-CONNECTIONS[1]:  60ede433-1d4b-329e-9af2-b3ffd4db8f27 | Wired connection 1

##### NetworkManager.state ##############

[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true

##### NetworkManager config #############

[[/etc/NetworkManager/conf.d/default-wifi-powersave-on.conf]]
[connection]
wifi.powersave = 3

[[/etc/NetworkManager/NetworkManager.conf]]
[main]
plugins=ifupdown,keyfile
[ifupdown]
managed=false
[device]
wifi.scan-rand-mac-address=no

[[/usr/lib/NetworkManager/conf.d/10-dns-resolved.conf]]
[main]
dns=systemd-resolved

[[/usr/lib/NetworkManager/conf.d/10-globally-managed-devices.conf]]
[keyfile]
unmanaged-devices=*,except:type:wifi,except:type:wwan

[[/usr/lib/NetworkManager/conf.d/20-connectivity-ubuntu.conf]]
[connectivity]
uri=http://connectivity-check.ubuntu.com/

[[/usr/lib/NetworkManager/conf.d/no-mac-addr-change.conf]]
[device-mac-addr-change-wifi]
match-device=driver:rtl8723bs,driver:rtl8189es,driver:r8188eu,driver:8188eu,driver:eagle_sdio,driver:wl
wifi.scan-rand-mac-address=no
wifi.cloned-mac-address=preserve
ethernet.cloned-mac-address=preserve

##### NetworkManager profiles ###########

##### Netplan config ####################

##### iw reg get ########################

Region: Europe/Kiev (based on set time zone)

global
country 00: DFS-UNSET
    (2402 - 2472 @ 40), (6, 20), (N/A)
    (2457 - 2482 @ 20), (6, 20), (N/A), AUTO-BW, PASSIVE-SCAN
    (2474 - 2494 @ 20), (6, 20), (N/A), NO-OFDM, PASSIVE-SCAN
    (5170 - 5250 @ 80), (6, 20), (N/A), AUTO-BW, PASSIVE-SCAN
    (5250 - 5330 @ 80), (6, 20), (0 ms), DFS, AUTO-BW, PASSIVE-SCAN
    (5490 - 5730 @ 160), (6, 20), (0 ms), DFS, PASSIVE-SCAN
    (5735 - 5835 @ 80), (6, 20), (N/A), PASSIVE-SCAN
    (57240 - 63720 @ 2160), (N/A, 0), (N/A)

##### iwlist channels ###################

enp0s25  no frequency information.

lo        no frequency information.

##### iwlist scan #######################

enp0s25  Interface doesn't support scanning.

lo        Interface doesn't support scanning.

##### module infos ######################

##### module parameters #################

##### /etc/modules ######################

##### modprobe options ##################

[/etc/modprobe.d/82577LM.conf]
options 82577LM fwlps=N

[/etc/modprobe.d/amd64-microcode-blacklist.conf]
blacklist microcode

[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci

[/etc/modprobe.d/blacklist.conf]
blacklist evbug
blacklist usbmouse
blacklist usbkbd
blacklist eepro100
blacklist de4x5
blacklist eth1394
blacklist snd_intel8x0m
blacklist snd_aw2
blacklist i2c_i801
blacklist prism54
blacklist bcm43xx
blacklist garmin_gps
blacklist asus_acpi
blacklist snd_pcsp
blacklist pcspkr
blacklist amd76x_edac

[/etc/modprobe.d/blacklist-rare-network.conf]
alias net-pf-3 off
alias net-pf-6 off
alias net-pf-9 off
alias net-pf-11 off
alias net-pf-12 off
alias net-pf-19 off
alias net-pf-21 off
alias net-pf-36 off

[/etc/modprobe.d/intel-microcode-blacklist.conf]
blacklist microcode

[/etc/modprobe.d/iwlwifi.conf]
remove iwlwifi \
(/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
&& /sbin/modprobe -r mac80211

##### rc.local ##########################

grep: /etc/rc.local: No such file or directory

##### pm-utils ##########################

[/etc/pm/sleep.d/config] (644 root)
SUSPEND_MODULES="82577LM"

##### udev rules ########################

[/etc/udev/rules.d/70-snap.network-manager.rules]
# network-manager
KERNEL=="rfkill", TAG+="snap_network-manager_networkmanager"
# ppp
KERNEL=="ppp", TAG+="snap_network-manager_networkmanager"
# ppp
KERNEL=="tty[a-zA-Z]*[0-9]*", TAG+="snap_network-manager_networkmanager"
TAG=="snap_network-manager_networkmanager", RUN+="/usr/lib/snapd/snap-device-helper $env{ACTION} snap_network-manager_networkmanager $devpath $major:$minor"

##### dmesg #############################

[    4.162572] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) <MAC 'enp0s25' [IF1]>
[    4.162575] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    4.162634] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[    4.435738] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    5.081462] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready (repeated 2 times)
[    6.798554] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx
[    6.798560] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
[    6.798609] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready

########## wireless info END ############
p.s. Sorry for my bad English.
↧

[ubuntu] Web click on lid close

March 24, 2019, 3:00 pm
$
0
0
When I close my laptop lid then open it after a while, over 50% of the time if I have a web page displayed when the lid is closed, a new web page will be displayed when I log back in. I thought it may have been my mouse which is a Logitech M510 wireless mouse. I removed the mouse USB dongle prior to closing the lid this last time and when I logged back in, I still had a new web page open from when I closed the lid. The new pages appear to be from links on the web page on the browser tab that was open when the lid was closed. If I have a video paused displaying on the web page of the tab open when I close the lid, the video will play for a few seconds until the machine goes to sleep. This should not be a virus as it is the third installation of Ubuntu (second from a new ISO) on this laptop. I know it happens with Chrome browser but am unsure if it happens with Firefox.

Any ideas how to cure this? I don't want to open my laptop one day to find I inadvertently purchased lingerie on a popular auction website. I would find that purchase hard to explain to my wife. Especially if it were the incorrect size.

Ubuntu 18.04.2 LTS
Inspiron 7547
Touch screen
https://www.dell.com/support/home/us.../configuration
↧
↧

Share zfs-dataset via nfs stopped working

March 24, 2019, 3:07 pm
$
0
0
I rebuilt my server last week, setup a zfs pool, shared a few datasets, today I had to reboot a server that was connected to the storage server via NFS and after this it cant mount the NFS shares from the storage server.
This is the error I get:
mount.nfs: requested NFS version or transport protocol is not supported

First I thought hey it is the wrong NFS version, so I tried -t nfs4 then I get access denied...

And on the storage server is see this when I take a service status on the NFS-server:
exportfs: Failed to stat /zfspool/media: No such file or directory

I have zfs set sharenfs for this dataset.

So here's my exports file:
/zfspool/media 10.20.1.0/24(rw,sync,no_subtree_check)

What am I doing wrong?
Atm, I feel like I am all over the place... please help!
↧

[ubuntu] Telecine from 18fps to 30fps

March 24, 2019, 3:19 pm
$
0
0
Hi folks,

I scanned an old super 8mm film into an MP4 file. The film runs at 18fps and I need to interpolate frames to reach 30fps for burning a DVD. I understand that Mencoder can do the job. Can someone please say what is the command line to do that job?

Thanks
↧

[ubuntu] None of my folders or files seem to exist in the eyes of my terminal?

March 24, 2019, 5:13 pm
$
0
0
Whenever I try to change directory it tells me that the directory doesn't exist, even when I have simply typed cd and then dragged the folder into the terminal and removed the apostrophes it still believes that the directory doesn't exist. This also happens when I try to run a python script. Below I have pasted the console output.

kester@kester-desktop:~$ pwd
/home/kester
kester@kester-desktop:~$ ls
Desktop Downloads Pictures PycharmProjects Templates
Documents Music Public snap Videos
kester@kester-desktop:~$ cd /PycharmProjects
bash: cd: /PycharmProjects: No such file or directory
kester@kester-desktop:~$ cd /PycharmProjects/
bash: cd: /PycharmProjects/: No such file or directory
kester@kester-desktop:~$ python3 selection_sort.py
python3: can't open file 'selection_sort.py': [Errno 2] No such file or directory

Screenshot at 2019-03-25 00-12-42.jpg
Attached Images
↧
Viewing all 82528 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>